| Title |
A Study on Plate Forming Model in Spray Forming Process |
| Authors |
석현광(Hyun Kwang Seok); 여동훈(Dong Hoon Yeo); 오규환(Kyu Hwan Oh); 나형용(Hyung Young Ra); 이호인(Ho In Lee) |
| Abstract |
Using numberical method, the work condition to make a plate preform in Spray Deposition Method has been optimized in this study. In this calculation we have used the assumptions that spray density is represented by Gaussian funtion and surface grows to normal direction and droplet flys from orifice to calculation points on the preform surface. We proposed two methods to make plate preforms by spray forming process, In each method the nozzle control function is derived as ; Method I ω(θ)=G·v·sinθ_(max)·√b·cos²(θ) Method II ω(θ)=G·v·sinρ_(max)·√b·1/cos(ρ) In these equation v is the substrate velocity, b is spray density constant, θ is the angle between spray axis and z-axis, and ρ is the angle between spray axis and y-axis. The simulation suggests that the constant G must be larger than 3 to make plate without surface modulation. |