| Title |
Research Paper / Transformations : Microstructure and Deformation Behavior of Ti-(43-54)Al-xMn-yNb(x=0,3,4,y=0,4) Alloys Microstructure and Mechanical Properties |
| Authors |
표성규(Sung G . Pyo),오진근(Jin Keun Oh),김낙준(Nack J . Kim) |
| Abstract |
The main objective of the present paper is to study the effect of heat treatment and temperature on mechanical properties of Ti-(43-54)Al-xMn-yNb (x=0, 3, 4, y=0, 4) alloys. The compressive yield strength as well as fracture strain was correlated with composition, microstructure, tetragonality, and strain rate. The controlled microstructures obtained by heat treatments were introduced in order to correlate the microstructural parameters with mechanical properties. The variation behavior of compressive yield strength of Ti_(49)Al_(51) base alloys showed the positive temperature dependence and the highest compressive yield strength among the measured six alloys was obtained in (Ti_(49)Al_(51))_(92)Mn₄Nb₄. The c/a ratio of (Ti_(53)Al_(47))_(97)Mn₃ alloy was measured using hot stage in-situ XRD technique at different temperatures. The c/a ratio was decreased significantly at 1273K. The c/a ratio of Ti-(43-54)Al-xMn-yNb (x=0, 3, 4, y=0, 4) base alloys also varied with the compositions. The compressive fracture strain of Ti_(53)Al_(47) base alloys was increased with decrease of the c/a ratio, while Ti_(49)Al_(51) base alloys had no correlation with the c/a ratio. |