The Journal of
the Korean Journal of Metals and Materials

The Journal of
the Korean Journal of Metals and Materials

Monthly
  • pISSN : 1738-8228
  • eISSN : 2288-8241

Editorial Office

Title Anisotropic Distributions of Lattice Distortion and Stress in Zr - 2.5 Nb Pressure Tube with Hydride Precipitates
Authors 김영석(Young Suk Kim),정용무(Yong Moo Cheong),김성수(Sung Soo Kim),임경수(Kyoung Soo Im)
Page pp.150-157
ISSN 1738-8228(ISSN), 2288-8241(eISSN)
Abstract The objective of this study is to investigate the effect of hydride precipitates on the distributions of the lattice distortion and stress in CANDU Zr-2.5Nb pressure tube. The three sections taken from CANDU Zr-2.5Nb tube, the longitudinal normal section(LS), the radial normal section(RS) and the transverse normal section(TS) were charged with hydrogen at 530℃ for 15 h. X-ray diffraction analysis was carried out on the sections with or without charged hydrogen using a X-ray diffractometer equipped with a position sensitive detector. The effect of hydride precipitates on the line broadening, the interplanar lattice spacing, and the macro-stress was determined from a change in the peak position and the half width of the diffraction lines {12.3} on the three sections. The hydride precipitates had an effect of increasing the interplanar lattice spacing of {12.3} only on the LS, causing tensile stress of as high as 400 ㎫ but decreased the interplanar lattice spacing on the TS causing it subjected to compressive stress. Based on a change in the distribution of line broadening with hydride precipitates on each section depending on the pole density of {12.3}, the preferential site for the precipitation of hydrides is discussed.