| Title |
Mechanical Behaviors : Effects of Microstructural Parameters on the Quasi - static and Dynamic Deformation Behaviors of Ti-6Al-4V Alloys with Widmanstatten Structures |
| Authors |
이동근(Dong Geun Lee),이성학(Sung Hak Lee),이종수(Chong Soo Lee),허선무(Sun Moo Hur) |
| ISSN |
1738-8228(ISSN), 2288-8241(eISSN) |
| Abstract |
This study is concerned with the effects of microstructural parameters on the quasi-static tensile and dynamic torsional deformation behaviors in Ti-6Al-4V alloys with Widmansta¨tten structures. Dynamic torsional tests were conducted using a torsional Kolsky bar for five Widmansta¨tten structures, which effective grain sizes such as colony size and α lamellar spacing were varied by heat-treatments, and then the test data were analyzed in relation to microstructures, tensile properties, and fracture mode. Under dynamic torsional loading, maximum shear stress showed a large dependence on the colony size as the effective grain size, while shear strain at the maximum shear stress point was largely affected by both the α lamellar spacing and the colony size. Adiabatic shear bands were found in the deformed region of the fractured specimens, and their width was smallest in the specimen having the large α lamellar spacing and colony size. The possibility of the adiabatic shear band formation was quantitatively analyzed by the theoretical critical shear strain (γ_c) condition. It was found to be most likely in the coarse Widmanstatten structure, whereas least likely in the fine Widmanstatten structure. |