| Title |
Wear Properties of Al2O3-8wt.%TiO2 Coatings Plasma-Sprayed Using Nanocrystalline Powders |
| Authors |
송은필(Eun Pil Song); 안지훈(Jee Hoon Ahn); 이성학(Sung Hak Lee); 김낙준(Nack J. Kim) |
| ISSN |
1738-8228(ISSN), 2288-8241(eISSN) |
| Keywords |
Plasma spray coating; Al2O3-TiO2 Nanopowder; Critical plasma spray parameter; Wear resistance |
| Abstract |
Correlation between microstructure and wear resistance of Al2O3-8wt.%TiO2 coatings plasm-sprayed using nanopowders was investigated in this study. Four types of nanostructured Al2O3-8wt.%TiO2 powders were plasma-sprayed on a low-carbon steel substrate by using different critical plasma spray parameters (CPSP). The coatings consisted of completely melted region of γ-Al2O3 phase and partially melted region of α-Al2O3. The fraction of the partially melted regions and pores decreased with increasing CPSP. The hardness and wear test results revealed that the hardness of the coatings increased with increasing CPSP, while the wear resistance was the highest for the coating sprayed with the lowest CPSP. The main wear mechanism was a delamination mode in the coating sprayed with the high CPSP, but was changed to an abrasive mode in the coating sprayed with the low CPSP. According to this change in the wear mechanism, the wear resistance was the best in the coating sprayed with lowest CPSP. |