| Title |
A Study on the Mechanical Properties of Weldments for AISI 409L Ferritic Stainless Steel |
| Authors |
이상화(Sang Hwa Lee); 신용택(Yong Taek Shin); 이해우(Hae Woo Lee) |
| DOI |
https://doi.org/10.3365/KJMM.2012.50.4.280 |
| ISSN |
1738-8228(ISSN), 2288-8241(eISSN) |
| Keywords |
metals; welding; precipitation; scanning electron microscopy (SEM); ferritic stainless steel |
| Abstract |
In this study, we prepared a sample of AISI 409L weld metals using automotive exhaust manifolds and evaluated their corrosion properties by conducting an anodic polarization test after 10 minute of heat treatment at 900℃. The specimens of AISI 409L transformed fully ferrite. Weld metal was refined more than base metal. Specimen of heat treatment at 900℃ and as weld specimen was formed precipitation. However heat treatment specimen was bulkly formed and coarser than the as weld specimen. The strength measured by 10 Hv highly at heat treatment specimens in comparison with as weld. The increase in strength is attributed to the precipitation of Ti. The result of heat treatment suggest that there was a decrease of current density and high corrosion potential. Following heat treatment process produced Ti precipitation and for this reason, it can restrain Cr-carbide so that steel will have more corrosion resistance. |