| Title |
Microstructure and Strengthening Mechanisms of Carbon Nanotube Reinforced Magnesium Matrix Composites Fabricated by Accumulative Roll Bonding |
| Authors |
유성진(Seong Jin Yoo); 김우진(Woo Jin Kim) |
| DOI |
https://doi.org/10.3365/KJMM.2014.52.7.561 |
| ISSN |
1738-8228(ISSN), 2288-8241(eISSN) |
| Keywords |
composites; mechanical miling; microstructure; transmission electron microscopy; TEM; magnesium matrix |
| Abstract |
A combination of accumulative roll bonding (ARB) and high-energy ball milling was used to fabricate carbon nanotube (CNT)-reinforced Mg composites in sheet form. CNT-Al composite powders synthesized using the high-energy ball-milling process, were coated on the surface of Mg sheets using either spraying or dipping methods. The coated sheets were stacked and then subjected to ARB. Formation of CNT-intermetallic compounds through inter-diffusion between Al and Mg, fragmentation of the CNTintermetallic compounds, and their dispersion into the matrix by plastic flow; as well as dissolution of the intermetallic compound particles into the matrix while leaving CNTs in the matrix, occurred in sequence during the ARB process. This eventually resulted in the uniform distribution of nano-sized CNT particles in the Mg matrix. As the thickness of the Mg sheet and of the coating layer of Al-CNT powder on the surface of the Mg sheet were similar, the dispersion of CNTs into the Mg matrix occurred more uniformly and the strengthening effect of adding CNTs was greater. The strengthening gained by adding CNTs was attributed to Orowan strengthening and dislocation-density increase due to a thermal mismatch between the matrix and the CNTs. †(Received July 17, 2013) |