| Title |
Raising the Dehydrogenation Rate of a Mg-CMC (Carboxymethylcellulose, Sodium Salt) Composite by Alloying Ni via Hydride-Forming Milling |
| Authors |
(Myoung Youp Song); (Eunho Choi); (Young Jun Kwak) |
| DOI |
https://doi.org/10.3365/KJMM.2018.56.8.620 |
| ISSN |
1738-8228(ISSN), 2288-8241(eISSN) |
| Keywords |
hydrogen absorbing materials; mechanical milling; scanning electron microscopy (SEM); X-ray diffraction; a polymer CMC (Carboxymethylcellulose; Sodium Salt) addition; Ni addition. |
| Abstract |
In our previous work, samples with a composition of 95 wt% Mg + 5 wt% CMC (Carboxymethylcellulose, Sodium Salt, [C6H7O2(OH)x(C2H2O3Na)y]n) (named Mg-5 wt%CMC) were prepared through hydride-forming milling. Mg-5 wt%CMC had a very high hydrogenation rate but a low dehydrogenation rate. Addition of Ni to Mg is known to increase the hydrogenation and dehydrogenation rates of Mg. We chose Ni as an additive to increase the dehydrogenation rate of Mg-5 wt%CMC. In this study, samples with a composition of 90 wt% Mg + 5 wt% CMC + 5 wt% Ni (named Mg-5 wt%CMC-5 wt%Ni) were made through hydride-forming milling, and the hydrogenation and dehydrogenation properties of the prepared samples were investigated. The activation of Mg-5 wt%CMC-5 wt%Ni was completed at the 3rd hydrogenation-dehydrogenation cycle (N=3). Mg-5 wt%CMC-5 wt%Ni had an effective hydrogen-storage capacity (the quantity of hydrogen stored for 60 min) of 5.83 wt% at 593 K in 12 bar hydrogen at N=3. Mg-5 wt%CMC-5 wt%Ni released hydrogen of 2.73 wt% for 10 min and 4.61 wt% for 60 min at 593 K in 1.0 bar hydrogen at N=3. Mg-5 wt%CMC-5 wt%Ni dehydrogenated at N=4 contained Mg and small amounts of MgO, β-MgH2, Mg2Ni, and Ni. Hydride-forming milling of Mg with CMC and Ni and Mg2Ni formed during hydrogenation-dehydrogenation cycling are believed to have increased the dehydrogenation rate of Mg-5 wt%CMC. As far as we know, this study is the first in which a polymer CMC and Ni were added to Mg by hydride-forming milling to improve the hydrogenation and dehydrogenation properties of Mg.(Received June 14, 2018; Accepted June 22, 2018) |