| Title |
Demonstration Testing of Boiler Tubes in a Clean Power Test-Bed Plant |
| Authors |
(Yeon Kwan Kang); (Yinsheng He); (Han-sang Lee); (Beom-soo Kim); (Liming Xu); (Keesam Shin) |
| DOI |
https://doi.org/10.3365/KJMM.2019.57.12.817 |
| ISSN |
1738-8228(ISSN), 2288-8241(eISSN) |
| Keywords |
heat resistant alloys; boiler tubes; locally development; demonstration test; properties; microstructure |
| Abstract |
The use of locally developed high performance alloys in power plants has become essential in the past ten years. Application of these alloys has been difficult because of a shortage of field demonstration testing, and the lack of lab-based test data. In this work, three types of locally developed heat resistant alloys were demonstration tested in boiler tubes in a power plant. The test procedures included a pre-test, a field demonstration and a post-test. The pre-test revealed the quality of the local tubes was the same level as the originally imported tubes. This suggested the potential outcomes of further demonstration testing. The demonstration was carried out by replacing parts of the original components with newly manufactured test components, made of local and imported tubes. There were no failures in the test components after 13,000h of operation. A portion of the tubes were sampled for a post-test, while the remaining parts were operated in the boiler for an even longer time. The post-test results revealed no significant degradation of the properties of the local tubes. The works no matter set up the properties database, but also set-up the performance and reliability, as well as test procedures for locally developed tubes.(Received September 3, 2019; Accepted October 29, 2019) |