| Title |
Effect of Bainitic Microstructure on Low-Temperature Toughness of High-Strength API Pipeline Steels |
| Authors |
이승완(Seung-wan Lee); 이상인(Sang-in Lee); 황병철(Byoungchul Hwang) |
| DOI |
https://doi.org/10.3365/KJMM.2020.58.5.293 |
| ISSN |
1738-8228(ISSN), 2288-8241(eISSN) |
| Keywords |
pipeline steel; bainitic microstructure; effective grain size; ductile-brittle transition; low-temperature toughness |
| Abstract |
In this study the correlation between bainitic microstructure and the low-temperature toughness of high-strength API pipeline steels was discussed in terms of crack initiation and propagation in the microstructure. Three types of API pipeline steels with different bainitic microstructures were fabricated using varying alloying elements and thermo-mechanical processing conditions, and then their microstructure was characterized by optical and scanning electron microscopy, and electron backscatter diffraction (EBSD). In particular, the effective grain size and microstructure fraction of the steels were quantitatively measured by EBSD analysis. Although all the steels were composed of polygonal ferrite (PF), and complex bainitic microstructures such as acicular ferrite (AF), granular bainite (GB), and bainitic ferrite (BF), they had different effective grain sizes and microstructure fraction, depending on the alloying elements and thermomechanical processing conditions. Charpy impact test results showed that when the martensite-austenite constituent fraction was lowest, it resulted in higher upper-shelf energy, and absorbed energy at room temperature due to the decrease in crack initiation. In contrast, excellent low-temperature toughness, such as lower ductile-brittle transition temperature and higher absorbed energy at low temperatures, could be achieved with a bainitic microstructure with fine effective grain size and high fraction of high-angle grain boundaries, which act as obstacles to prevent cleavage crack propagation. |