KJMM

The Journal of
the Korean Journal of Metals and Materials

Monthly

pISSN : 1738-8228
eISSN : 2288-8241

Editorial Office

Tel. +82-2-557-1071
Fax. +82-2-557-1080
E-mail. metal@kim.or.kr

REFERENCES

Isfahany A.N., Saghafian H., Borhani G., The effect of heat treatment on mechanical properties and corrosion behavior of AISI420 martensitic stainless steel,J. Alloys Compd,509, 3931-3936, (2011)

Alphonsa I., Chainani A., Raole P.M., Ganguli B., John P.I., A study of martensitic stainless steel AISI 420 modified using plasma nitriding,Surf. Coatings Technol,150, 263-268, (2002)

Morshed-Behbahani K., Zakerin N., Najafisayar P., Pakshir M., A survey on the passivity of tempered AISI 420 martensitic stainless steel,Corros. Sci,183, 109340 (2021)

Barlow L.D., Du Toit M., Effect of austenitizing heat treatment on the microstructure and hardness of martensitic stainless steel AISI 420,J. Mater. Eng. Perform,21, 1327-1336, (2012)

Prieto G., Ipiña J.E.P., Tuckart W.R., Cryogenic treatments on AISI 420 stainless steel: Microstructure and mechanical properties,Mater. Sci. Eng. A,605, 236-243, (2014)

Mahmoudi B., Torkamany M.J., Aghdam A.R.S.R., Sabbaghzade J., Laser surface hardening of AISI 420 stainless steel treated by pulsed Nd:YAG laser,Mater. Des,31, 2553-2560, (2010)

Dodds S., Jones A.H., Cater S., Tribological enhancement of AISI 420 martensitic stainless steel through friction-stir processing,Wear,302, 863-877, (2013)

Rajasekhar A., Madhusudhan Reddy G., Mohandas T., Murti V.S.R., Influence of austenitizing temperature on microstructure and mechanical properties of AISI 431 martensitic stainless steel electron beam welds,Mater. Des,30, 1612-1624, (2009)

Samih Y., Marcos G., Stein N., Allain N., Fleury E., Dong C., Grosdidier T., Microstructure modifications and associated hardness and corrosion improvements in the AISI 420 martensitic stainless steel treated by high current pulsed electron beam (HCPEB),Surf. Coatings Technol,259, 737-745, (2014)

Anantha K.H., Örnek C., Ejnermark S., Medvedeva A., Sjöström J., Pan J., Correlative Microstructure Analysis and In Situ Corrosion Study of AISI 420 Martensitic Stainless Steel for Plastic Molding Applications,J. Electrochem. Soc,164, C85-C93, (2017)

Salahi S., Kazemipour M., Nasiri A., Effects of microstructural evolution on the corrosion properties of AISI 420 martensitic stainless steel during cold rolling process,Mater. Chem. Phys,258, 123916 (2021)

Fruchart D., Miraglia S., Laborie D., Magnetic properties of an AISI 420 martensitic stainless steel,312, 307-314, (2000)

Karimbaev R., Pyun Y., Maleki E., Unal O., Amanov A., Materials Science & Engineering A An improvement in fatigue behavior of AISI 4340 steel by shot peening and ultrasonic nanocrystal surface modification,Mater. Sci. Eng. A,791, 139752 (2020)

Ozturk M., Husem F., Karademir I., Maleki E., Amanov A., Unal O., Fatigue crack growth rate of AISI 4140 low alloy steel treated via shot peening and plasma nitriding,Vacuum,207, 111552 (2023)

Umapathi A., Swaroop S., Measurement of residual stresses in titanium alloys using synchrotron radiation,Meas. J. Int. Meas. Confed,140, 518-525, (2019)

Wang C., Luo K., Bu X., Su Y., Cai J., Zhang Q., Lu J., Laser shock peening-induced surface gradient stress distribution and extension mechanism in corrosion fatigue life of AISI 420 stainless steel,Corros. Sci,177, 109027 (2020)

ASTM E8/E8M standard test methods for tension testing of metallic materials 1,ASTM E8, Annu. B. ASTM Stand,4, 1-27, (2010)

Sitdikov V.D., Islamgaliev R.K., Sitdikova G.F., Ganeev A. V., Nikitina M.A., Unusual Rolling Texture in Ferritic/Martensitic Steel,J. Mater. Eng. Perform,31, 1971-1980, (2022)

Yu Z.P., Yan Y.H., Yao J., Wang C., Zha M., Xu X.Y., Liu Y., Wang H.Y., Jiang Q.C., Effect of tensile direction on mechanical properties and microstructural evolutions of rolled Mg-Al-Zn-Sn magnesium alloy sheets at room and elevated temperatures,J. Alloys Compd,744, 211-219, (2018)

Kim W.J., Hong S.I., Kim Y.S., Min S.H., Jeong H.T., Lee J.D., Texture development and its effect on mechanical properties of an AZ61 Mg alloy fabricated by equal channel angular pressing,Acta Mater,51, 3293-3307, (2003)

Rout M., Texture-tensile properties correlation of 304 austenitic stainless steel rolled with the change in rolling direction Texture-tensile properties correlation of 304 austenitic stainless steel rolled with the change in rolling direction,Mater. Res. Express,7, 016563 (2020)

Ryu S.H., Kim K. Il, Noh W., Kim S.S., Cho G.S., Effect of microstructural parameters on the tensile property of WC-12~22wt%Co cemented carbide,J. Korean Inst. Met. Mater,59, 201-208, (2021)

Ma Y.R., Yang H.J., Ben D.D., Shao X.H., Zhang Y.Z.T.Q.W.Z.F., Anisotropic Electroplastic Effects on the Mechanical Properties of a Nano - Lamellar Austenitic Stainless Steel,Acta Metall. Sin,34, 534-542, (2021)

Iordanova I., Antonov V., Gurkovsky S., Changes of microstru3cture and mechanical properties of cold-rolled low carbon steel due to its surface treatment by Nd : glass pulsed laser,Surf. Coatings Technol,153, 267-275, (2002)

Neslušan M., Pitoňák M., Minárik P., Tkáč M., Kollár P., Životský O., Influence of domain walls thickness, density and alignment on Barkhausen noise emission in low alloyed steels,Sci. Rep,13, 1-14, (2023)

Spearot D.E., Sangid M.D., Insights on slip transmission at grain boundaries from atomistic simulations, Curr. Opin,Solid State Mater. Sci,18, 188-195, (2014)

Yang B., Vehoff H., Dependence of nanohardness upon indentation size and grain size - A local examination of the interaction between dislocations and grain boundaries,Acta Mater,55, 849-856, (2007)

Kacher J., Eftink B.P., Cui B., Robertson I.M., Dislocation interactions with grain boundaries, Curr. Opin,Solid State Mater. Sci,18, 227-243, (2014)

Hwang I.-H., https://www.e-jwj.org/upload/PDF/0/49/92/0499249.pdf, A Development of SEM Applied Microjoining System, (2003)

Trimethoxysilylmethyl S., Sherstyannikova L. V., Voronkov M.G., E I E I E I,75, 558-243, (2004)

Zhao M.C., Unenbayar T., Zhao Y.C., Liu C., Tian Y., Yin D., Atrens A., Influence of Tempering Temperature on the Microstructure and Mechanical Properties of a Cr–Ni–Mo-Alloyed Steel for Rock Drill Applications,Steel Res. Int,90, 1-5, (2019)

Channa I.A., Shah A.A., Abro S.H., Ali M., Sukkur IBA J. Emerg. Technol,2, 1, -2, (2019)

Hwang C., Joe M., Kim S., Han D., Yoo K., Kim S., Kim Y., Lee S., Park J., Evaluation and Prediction of Formation of Heat-Affected Zone and Mechanical Properties According to Welding Method of STS 316L/A516-70N Clad Plates,J. Korean Inst. Met. Mater,60, 873-883, (2022)

Ryu S.H., Jo M.G., Kim K. Il, Noh W., Hong I.J., Lee K.H., Kim S.S., Cho G.S., Tensile and Fatigue Characteristics of WC-20wt%Co Cemented Carbide with Sintering Methods,J. Korean Inst. Met. Mater,60, 227-236, (2022)

Park S., Kim S., Lee D., Ahn S., Kim S., Effect of microstructural factors on fatigue and fatigue crack propagation behaviors of mill-annealed Ti-6Al-4V alloy,J. Korean Inst. Met. Mater,56, 845-853, (2018)

Polák M.K. J., The dynamics of cyclic plastic deformation and fatigue life of low carbon steel at low temperatures,Mater. Sci. Eng,26, 157-166, (1976)

Man J., Vystavěl T., Weidner A., Kuběna I., Petrenec M., Kruml T., Polák J., Study of cyclic strain localization and fatigue crack initiation using FIB technique,Int. J. Fatigue,39, 44-53, (2012)

Fatoba O., Akid R., Uniaxial cyclic elasto-plastic deformation and fatigue failure of API-5L X65 steel under various loading conditions,Theor. Appl. Fract. Mech,94, 147-159, (2018)

Gao W., Lu J., Zhou J., Liu L., Wang J., Zhang Y., Zhang Z., Effect of grain size on deformation and fracture of Inconel718: An in-situ SEM-EBSD-DIC investigation,https://www.sciencedirect.com/science/article/abs/pii/S0921509322017415?via%3Dihub, (2022)

뒤로가기

No part of this publication may be reproduced or distributed in any form or any means, or stored in a data base or retrieval system, without the prior permission of the publisher ( https://kim.or.kr ).

KJMM Korean Journal of Metals and Materials

Editorial Office

Journal XML

REFERENCES