KJMM

The Journal of
the Korean Journal of Metals and Materials

Monthly

pISSN : 1738-8228
eISSN : 2288-8241

Editorial Office

Tel. +82-2-557-1071
Fax. +82-2-557-1080
E-mail. metal@kim.or.kr

REFERENCES

Chin H.S., Cheong K.T., Ismail A.B., A review on die attach materials for SiC-based high-temperature power devices, Metall. Mater. Trans,41, 824 (2010)

Bai J.G., Yin J., Zhang Z., Lu G.-Q., van Wyk J.D., High-temperature operation of SiC power devices by low-temperature sintered silver die-attachment,IEEE Trans. Adv. Packag,30, 506 (2007)

Hong W.S., Kim M.S., Oh C., Low-pressure silver sintering of automobile power modules with a silicon-carbide device and an active-metal-brazed substrate,J. Electron. Mater,49, 188 (2020)

Zhang Z., Lu G.-Q., Pressure-assisted low-temperature sintering of silver paste as an alternative die-attach solution to solder reflow,IEEE Trans. Electron. Packag. Manuf,25, 279 (2002)

Ishihara S., Takemasa T., Suganuma K., Kano J., Analysis of the formation mechanism of coarse-dense structure of silver paste in die bonding,Adv. Powder Technol,32, 2020 (2021)

Chen T.F., Siow K.S., Comparing the mechanical and thermal-electrical properties of sintered copper (Cu) and sintered silver (Ag) joints,J. Alloy. Compd,866, 158783 (2021)

Pouranvari M., Ekrami A., Kokabi A.H., Effect of bonding temperature on microstructure development during TLP bonding of a nickel base superalloy,J. Alloy. Compd,469, 270 (2009)

Ning P., Lei T.G., Wang F., Lu G-Q., Ngo K.D.T., Rajashekara K., A novel high-temperature planar package for SiC multichip phase-leg power module,IEEE Trans. Power Electron,25, 2059 (2010)

Yoon S.W., Glover M.D., Shiozaki K., Nickel-tin transient liquid phase bonding toward high temperature operational power electronics in electrified vehicles,IEEE Trans. Power Electron,28, 2448 (2013)

Mustain H.A., Brown W.D., Ang S.S., Transient liquid phase die attach for high-temperature silicon carbide power devices,IEEE Trans. Compon. Packaging Technol,33, 563 (2010)

Shao H., Wu A., Bao Y., Zhao Y., Zou G., Microstructure characterization and mechanical behavior for Ag3Sn joint produced by foil-based TLP bonding in air atmosphere,Mater. Sci. Eng. A,680, 221 (2017)

Bajwa A.A., Wilde J., Reliability modeling of Sn-Ag transient liquid phase die-bonds for high-power SiC devices,Microelectron. Reliab,60, 116 (2016)

Lee C.H., Choi E.B., Lee J-H., Characterization of novel high-speed die attachment method at 225 °C using submicrometer Ag-coated Cu particles,Scr. Mater,150, 7 (2018)

Fu S., Mei Y., Lu G-Q., Li X., Chen G., Chen X., Pressureless sintering of nanosilver paste at low temperature to joint large area (≥100 mm2) power chips for electronic packaging,Mater. Lett,128, 42 (2014)

Kim Y., Han B.J., Lee J.-H., Paste containing 1.5 μm Ag particles with enhanced surface area: ultrafast thermocompression sinter-bonding and annealing effects,Korean J. Met. Mater,60, 827 (2022)

Liu X., Nishikawa H., Low-pressure Cu-Cu bonding using in-situ surface-modified microscale Cu particles for power device packaging,Scr. Mater,120, 80 (2016)

Jianfeng Y., Guisheng Z., Anming H., Zhou Y.N., Preparation of PVP coated Cu NPs and the application for low-temperature bonding,J. Mater. Chem,21, 15981 (2011)

Kaimori S., Nonaka T., Mizoguchi A., The development of Cu bonding wire with oxidation-resistant metal coating,lEEE Trans. Adv. Packag,29, 227 (2006)

Han B.J., Kim Y., Lee J.-H., A review of recent research trends of forming of metallic bondlines using core-shell particles and bonding properties according to particle type,Korean J. Met. Mater,61, 679 (2023)

Gao R., He S., Li J., Shen Y.-A., Nishikawa H., Interfacial transformation of preoxidized Cu microparticles in a formicacid atmosphere for pressureless Cu-Cu bonding,J. Mater. Sci.: Mater. Electron,31, 14635 (2020)

Yabuki A., Arriffin N., Yanase M., Low-temperature synthesis of copper conductive film by thermal decomposition of copper-amine complexes,Thin Solid Films,519, 6530 (2011)

Yabuki A., Tanaka S., Electrically conductive copper film prepared at low temperature by thermal decomposition of copper amine complexes with various amines,Mater. Res. Bull,47, 4107 (2012)

Joo M., Lee B., Jeong S., Lee M., Laser sintering of Cu paste film printed on polyimide substrate,Appl. Surf. Sci,258, 521 (2011)

Lee B., Jeong S., Kim Y., Jeong I., Woo K., Moon J., Hybrid copper complex-derived conductive patterns printed on polyimide substrates,Met. Mater. Int,18, 493 (2012)

Joo M., Lee B., Jeong S., Lee M., Comparative studies on thermal and laser sintering for highly conductive Cu films printable on plastic substrate,Thin Solid Films,520, 2878 (2012)

Farraj Y., Grouchko M., Magdassi S., Self-reduction of a copper complex MOD ink for inkjet printing conductive patterns on plastics,Chem. Commun,51, 1587 (2015)

Lee B.Y., Synthesis and characterization of conductive paste using copper complex,Ph. D. Thesis,Yonsei University (2011)

Lee B., Jeong S., Kim Y., Jeong I., Woo K., Moon J., Hybrid copper complex-derived conductive patterns printed on polyimide substrates,Met. Mater. Int,18, 493 (2012)

Rosenband V., Gany A., Preparation of nickel and copper submicrometer particles by pyrolysis of their formats,J. Mater. Process. Technol,153-154, 1058 (2004)

Vecher A.A., Dalidovich S.V., Gusev E.A., Decomposition of copper(Ⅱ), nickel(Ⅱ) and cobalt(Ⅱ) formats in self-generated atmospheres,Thermochim. Acta,89, 383 (1985)

Suganuma K., Kim S.-J., Kim K.-S., High-temperature lead-free solders: properties and possibilities,JOM,61, 64 (2009)

Rebhan B., Hesser G., Duchoslav J., Dragoi V., Wimplinger M., Hingeri K., Low-temperature Cu-Cu wafer bonding,ECS Trans,50, 139 (2013)

뒤로가기

No part of this publication may be reproduced or distributed in any form or any means, or stored in a data base or retrieval system, without the prior permission of the publisher ( https://kim.or.kr ).

KJMM Korean Journal of Metals and Materials

Editorial Office

Journal XML

REFERENCES