KJMM

The Journal of
the Korean Journal of Metals and Materials

Monthly

pISSN : 1738-8228
eISSN : 2288-8241

Editorial Office

Tel. +82-2-557-1071
Fax. +82-2-557-1080
E-mail. metal@kim.or.kr

REFERENCES

Semiatin S., Elements of induction heating: design, control, and applications,ASM International (1988)

Rudnev V., Gear Technol,1, 58 (2008)

Garois S., Daoud M., Chinesta F., Metals,13, 997 (2023)

Shi X., Lv C., Li G., Wang K., Chen J., Tang J., Front. Mater,10, 1240087 (2023)

Tong D., Gu J., Totten G. E., Int. J. Mech. Sci,142, 1 (2018)

Coryell J. J., Matlock D., Speer J., Heat Treating for the 21st Century: Vision 2020 and New Materials Development - Proc. of Mat. Sci. & Tech, Colorado School of Mines, 3-14, AIST (2004)

Clarke K., Van Tyne C., Vigil C., Hackenberg R., J. Mater. Eng. Perform,20, 161 (2011)

Ducassy C., Bridier F., Bocher P., Arkinson P., Proc. 48th Conf. of Metallurgists, 43-52, Sudbury (2009)

Szczotok A., Radek N., Dwornicka R., Metal 2018: 27th Int. Conf. Metallurgy and Materials, 1264-1269, Ostrava, Tanger Ltd. (2018)

Prisco U., Int. J. Adv. Manuf. Technol,98, 2619 (2018)

Griebel A., Tartaglia J., ASM International, Principles of Induction Hardening and Inspection, ASM Handbook, vol.4c, (2014)

Furuhara T., Kikumoto K., Saito H., Sekine T., Ogawa T., Morito S., Maki T., ISIJ Int,48, 1038 (2008)

Hanamura T., Torizuka S., Tamura S., Enokida S., Takechi H., ISIJ Int,53, 2218 (2013)

Weng Y., Ultra-Fine Grained Steels,300-349, Springer (2009)

Kim H. J., Kim Y. H., Morris J. W., ISIJ Int,38, 1277 (1998)

Morris J. W., ISIJ Int,48, 1063 (2008)

Krauss G., Steel Res. Int,88, 1700038 (2017)

Hidalgo J., Santofimia M. J., Metall. Mater. Trans. A,47, 5288 (2016)

Shibata A., Miyamoto G., Morito S., Nakamura A., Moronaga T., Kitano H., Gutierrez-Urrutia I., Hara T., Tsuzaki K., Acta Mater,246, 118675 (2023)

Bowler J. R., Huang Y., Sun H., Brown J., Bowler N., Meas. Sci. Technol,19, 075204 (2008)

Lee H., Anaman S. Y., Rho N.-S., Sung S.-H., Sung H.-M., Lee S.-Y., Cho H.-H., Korean J. Met. Mater,61, 815 (2023)

Jo M. G., Ryu S. H., Kim K. I., Kim D. E., Kim J. I., Kim K. T., Kim S. S., Cho G. S., Korean J. Met. Mater,60, 251 (2022)

KS D 3867, Low-alloyed Steels for Machine Structural Use,Korean Agency for Technology and Standards (2015)

ASTM A29/A29M-05, Annual Book of ASTM Standards,ASTM international (2005)

American National Standards Institute, Gear Materials and Heat Treatment Manual,30American Gear Manufacturers Association (1989)

Olson G. B., Anctil A. A., DeSisto T. S., Kula E. B., Mater. Trans. A,14, 1661 (1983)

Łukaszek-Sołek A., Krawczyk J., Śleboda T., Grelowski J., J. Mater. Res. Technol,8, 3281 (2019)

Tartaglia J. M., Lazzari K. A., Hui G. P., Hayrynen K. L., Metall. Mater. Trans. A,39, 559 (2008)

Hayne M., Anderson P., Findley K., Van Tyne C., Metall. Mater. Trans. A,44, 3428 (2013)

Morito S., Saito H., Ogawa T., Furuhara T., Maki T., ISIJ Int,45, 91 (2005)

Grum J., J. Mater. Process. Technol,114, 212 (2001)

Kang S., Speer J. G., Regier R. W., Nako H., Kennett S. C., Findley K. O., Mater. Sci. Eng. A,669, 459 (2016)

Furuhara T., Kawata H., Morito S., Maki T., Mater. Sci. Eng. A,431, 228 (2006)

Takayama N., Miyamoto G., Furuhara T., Acta Mater,60, 2387 (2012)

Kawata H., Sakamoto K., Moritani T., Morito S., Furuhara T., Maki T., Mater. Sci. Eng. A,438, 140 (2006)

Morito S., Tanaka H., Konishi R., Furuhara T., Maki , Acta Mater,51, 1789 (2003)

Prawoto Y., Jasmawati N., Sumeru K., J. Mater. Sci. Technol,28, 461 (2012)

Zhang C., Wang Q., Ren J., Li R., Wang M., Zhang F., Sun K., Mater. Sci. Eng. A,534, 339 (2012)

Kitahara H., Ueji R., Tsuji N., Minamino Y., Acta Mater,54, 1279 (2006)

뒤로가기

No part of this publication may be reproduced or distributed in any form or any means, or stored in a data base or retrieval system, without the prior permission of the publisher ( https://kim.or.kr ).

KJMM Korean Journal of Metals and Materials

Editorial Office

Journal XML

REFERENCES