Prashar G., Vasudev H., Results Surf. Interfaces,16, 100263 (2024)
Marshall S. J., Bayne S. C., Baier R., Tomsia A. P., Marshall G. W., Dent. Mater,26,
(2010)
Rosenkranz A., Soler M., Boidi G., Ronai B., Varga M., Pineda F., Righi M. C., Adv.
Colloid Interface Sci,345, 103631 (2025)
Maxwell A. S., NPL Report MATC (A) 49,National Physical Laboratory (2001)
Kim J. H., Kil H. J., Lee S., Park J., Park J. W., ACS Omega,7, 25219 (2022)
Lim S. W., Huh J. S., Korean J. Met. Mater,61, 157 (2023)
Ertürk M. T., Tirkeş S., Gür C. H., Met. Mater. Int,30, 3268 (2024)
Othman M. F., Bushroa A. R., Abdullah W. N. R., J. Adhes. Sci. Technol,29, 569 (2015)
Scivetti I., Teobaldi G., ACS Appl. Eng. Mater,3, 1177 (2025)
Müller D., Cho Y. R., Fromm E., Thin Solid Films,236, 253 (1993)
Kwon H., Kang Y., Yoo Y., Kim D., Park Y., Nam U. H., Byon E., Korean J. Met. Mater,62,
613 (2024)
Chen X., Shaw C., Gelman L., Grattan K. T. V., Measurement,139, 387 (2019)
Chalker P. R., Bull S. J., Rickerby D. S., Mater. Sci. Eng. A,140, 583 (1991)
Król P., Król B., J. Eur. Ceram. Soc,26, 2241 (2006)
Budelmann D., Schmidt C., Meiners D., Compos. Part C Open Access,6, 100204 (2021)
Pandiyaraj K. N., Selvarajan V., Deshmukh R. R., Gao C., Appl. Surf. Sci,255, 3965
(2009)
Clint J. H., Curr. Opin. Colloid Interface Sci,6, 28 (2001)
Pandiyaraj K. N., Selvarajan V., Deshmukh R. R., Bousmina M., Surf. Coat. Technol,202,
4218 (2008)
Xu J., Ma B., Zhou S., Mao W., Wang X., Constr. Build. Mater,394, 132251 (2023)
García A. A., Castellón E. R., Millas D. P., Appl. Surf. Sci,513, 145764 (2020)
Mon S. Y., Shin D. H., Lee D. H., Lee S. H., Cho Y. R., J. Surf. Sci. Eng,58, 41 (2025)
Hintermann H. E., in Science of Hard Materials,357Plenum Press (1983)
Lee S. H., Kim H. K., Song M. K., Kim J. W., Lee S. Y., Korean J. Met. Mater,57, 695
(2019)
Cho Y. R., Fromm E., J. Korean Inst. Met. Mater,33, 73 (1995)
Ha Y., Kim T. C., Baeg J. H., Kim J. S., Shon M., Cho Y. R., Int. J. Adhes. Adhes,117,
103182 (2022)
Ha Y., Sim J. H., Baeg J. H., Kim M. K., Cho Y. R., J. Microelectron. Packag. Soc,27,
127 (2020)
Shinde S., Sampath S., J. Therm. Spray Technol,31, 2247 (2022)
Benzarti Z., Neiva J., Santo D., Gavinho S., Laranjeira J., Carvalho S., Figueiredo
N. M., Surf. Interfaces,64, 106403 (2025)
Jeon Y., Kim S., Kim Y., Lee K. H., Korean J. Met. Mater,63, 475 (2025)
Randall N. X., Surf. Coat. Technol,380, 125092 (2019)
Yang G., Xu L., Li D., Li N., Zhang G., J. Mater. Eng. Perform,31, 6711 (2022)
Maher I., Mehran Q. M., Met. Mater. Int,28, 421 (2022)
Lenz B., Hasselbruch H., Mehner A., Surf. Coat. Technol,385, 125365 (2020)
Liu W., Xu Z., Peng J., Wang C., Appl. Surf. Sci,708, 163738 (2025)
Bartlett M. D., Case S. W., Kinloch A. J., Dillard D. A., Prog. Mater. Sci,137, 101086
(2023)
Sim J. H., Ha Y., Kim M. K., Kim M. J., Cho Y. R., Met. Mater. Int,28, 361 (2022)
Mahan K., Rosen D., Han B., ASME J. Electron. Packag,138, 041003 (2016)
Cao Z., Wang P., Gao W., Tao L., Suk J. W., Ruoff R. S., Akinwande D., Huang R., Liechti
K. M., Carbon,69, 390 (2014)
Reid B., Mane I., Ahmed F., Fornerod M. J., Füredi M., Schmidt-Hansberg B., Alvarez-Fernandez
A., Guldin S., Microporous Mesoporous Mater,345, 112246 (2022)
Beake B. D., Coatings,12, 793 (2022)
Ju Y. M., Kim D., Lee S. M., Kim H., Lee D., Hwang Y. T., Lee S. H., Kim H. S., Appl.
Surf. Sci. Adv,28, 100783 (2025)
Smagulova D., Yilmaz B., Jasiuniene E., Sensors,24, 176 (2024)
ASTM International, ASTM D1002-10: Standard Test Method for Apparent Shear Strength
of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal),
https://standards.iteh.ai/catalog/standards/astm/d1002-10, (2010)
International Organization for Standardization, ISO 4587:2017 Adhesives — Determination
of tensile lap-shear strength of rigid-to-rigid bonded assemblies, https://standards.iteh.ai/catalog/standards/iso/4587-2017,
(2017)
ASTM International, ASTM D4541-17: Standard Test Method for Pull-Off Strength of Coatings
Using Portable Adhesion Testers, https://standards.iteh.ai/catalog/standards/astm/d4541-17,
(2017)
International Organization for Standardization, ISO 4624:2016 Paints and varnishes
— Pull-off test for adhesion, https://standards.iteh.ai/catalog/standards/iso/4624-2016,
(2016)
ASTM International, ASTM C633-13: Standard Test Method for Adhesion or Cohesion Strength
of Thermal Spray Coatings, https://standards.iteh.ai/catalog/standards/astm/c633-13,
(2013)
International Organization for Standardization, ISO 14916:2017 Thermal spraying —
Determination of tensile adhesive strength, https://standards.iteh.ai/catalog/standards/iso/14916-2017,
(2017)
ASTM International, ASTM D3359-17: Standard Test Methods for Rating Adhesion by Tape
Test, https://standards.iteh.ai/catalog/standards/astm/d3359-17, (2017)
International Organization for Standardization, ISO 2409:2020 Paints and varnishes
— Cross-cut test, https://standards.iteh.ai/catalog/standards/iso/2409-2020, (2020)
ASTM International, ASTM C1624-05(2015): Standard Test Method for Adhesion Strength
and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch
Testing, https://standards.iteh.ai/catalog/standards/astm/c1624-05-2015, (2015)
International Organization for Standardization, ISO 20502:2005 Fine ceramics — Coated
components — Determination of adhesion, https://standards.iteh.ai/catalog/standards/iso/20502-2005,
(2005)
ASTM International, ASTM E2546-15: Standard Practice for Instrumented Indentation
Testing, https://standards.iteh.ai/catalog/standards/astm/e2546-15, (2015)
International Organization for Standardization, ISO 26443:2008 Fine ceramics — Determination
of three-point flexural strength of ceramic coatings, https://standards.iteh.ai/catalog/standards/iso/26443-2008,
(2008)
ASTM International, ASTM D6862-11(2016): Standard Test Method for 90 Degree Peel Resistance
of Adhesives, https://standards.iteh.ai/catalog/standards/astm/d6862-11-2016, (2016)
International Organization for Standardization, ISO 8510-2:2006 Adhesives — Peel test
for a flexible-to-flexible bonded assembly — Part 2: 180° peel, https://standards.iteh.ai/catalog/standards/iso/8510-2-2006,
(2006)
ASTM International, ASTM D714-02(2017): Standard Test Method for Evaluating Degree
of Blistering of Paints, https://standards.iteh.ai/catalog/standards/astm/d714-02-2017,
(2017)
International Organization for Standardization, ISO 4628-2:2016 Paints and varnishes
— Evaluation of degradation of coatings — Part 2: Assessment of degree of blistering,
https://standards.iteh.ai/catalog/standards/iso/4628-2-2016, (2016)
ASTM International, ASTM D3363-20: Standard Test Method for Film Hardness by Pencil
Test, https://standards.iteh.ai/catalog/standards/astm/d3363-20, (2020)
International Organization for Standardization, ISO 15184:2020 Paints and varnishes
— Determination of film hardness by pencil test, https://standards.iteh.ai/catalog/standards/iso/15184-2020,
(2020)
ASTM International, ASTM D2794-93(2019): Standard Test Method for Resistance of Organic
Coatings to the Effects of Rapid Deformation (Impact)., https://standards.iteh.ai/catalog/standards/astm/d2794-93-2019,
(2019)
International Organization for Standardization, ISO 6272-1:2011 Paints and varnishes
— Rapid-deformation (impact resistance). tests — Part 1: Falling-weight test, large-area
indenter, https://standards.iteh.ai/catalog/standards/iso/6272-1-2011, (2011)
ASTM International, ASTM E494-95(2015): Standard Practice for Measuring Ultrasonic
Velocity in Materials, https://standards.iteh.ai/catalog/standards/astm/e494-95-2015,
(2015)
International Organization for Standardization, ISO 16810:2014 Non-destructive testing
— Ultrasonic testing — General principles, https://standards.iteh.ai/catalog/standards/iso/16810-2014,
(2014)
Hahn O., Wender B., Schweißen und Schneiden,37, 74 (1985)
Calvez P., Bistac S., Brogly M., Richard J., Verchere D., J. Adhes,88, 145 (2012)